Configuring a Connection Channel

When you select a connection channel in the VCOM-TCP Primary Client window and click the Configure button, the Configuring a Connection dialog brings up:

Each connection channel has its own settings displayed in the dialog to reflect the settings you have made for that COM port.

This dialog lets you change parameter values for a connection channel selected from the connection channel list. These parameters are similar to those displayed in the Add dialog box. (Refer to section Adding a Connection Channel above.)

Additionally, you can specify whether VCOM-TCP Primary Client will restart (according to reconnection parameters you can enter) or not when the connection fails.

To configure an existing connection channel:

1. In the VCOM-TCP Primary Client window, select a connection channel
2. Make Initial settings for the serial port parameters
3. Specify a TCP/IP address of a server
4. Specify a TCP/IP port number of the server
5. In the Protocol Type box, choose a transport data stream protocol type
6. Press OK

Your changes become effective when you click the OK button.